ski and board spacer

 

Waterproofing Tips

Waterproof ratings are only important when talked about in relation to Breathability ratings. It's useless having a highly waterproof jacket or pant if it doesn't breath as you will sweat so much, that you will get wet from the effects of your own perspiration - and that means, cold!

So, not only does your garment need to be highly waterproof, it also needs to have some level of breathability.

And, just to make matters even more complicated, this is where seam sealing is important: if your seams leak, then you are going to get wet.

We have listed a few options that you can use to ensure that your gear remains waterproof and ready to use.

Reviving your Waterproofing

Spray on Waterproofing

When looking for a spray on waterproofer, ensure that you select one that will not block the pores of the fabric. Always apply this product to used clothing to keep items in perfect water-repellent condition. To maintain the performance of waterproofed gear, regularly clean with Nikwax Tech Wash to remove everyday dirt and contaminants.

  • It rejuvenates the water repellency of tired, worn clothing
  • It overcomes the problems of gear ‘wetting-out’
  • It maintains breathability
  • It prolongs the life of gear and optimises performance in wet weather
  • It’s easy to apply

    •  

    How to Apply spray on waterproofer

    1. Protect working surface and lay clean wet fastened garment flat.
    2. Hold bottle 15 cm/6 inches away from garment.
    3. Apply evenly to outside of fabric.
    4. Wait for 2 minutes. Remove any surplus product with a damp cloth.
    5. Check carefully to ensure no areas have been missed

     

    Wash In Waterproofing

    Adds water-repellency and revives breathability to fabrics without wicking liners.For best results remove all non-washable parts and always clean item(s) first with Nikwax® Tech Wash® in a separate wash cycle. No need to dry item(s) before waterproofing. Shake well before use. Follow care label instructions.

  • Clothing with drop liners
  • Microporous coatings
  • Gore-Tex
  • Sympatex
  • DWR
  • Microfibre fabrics
  • Breathable laminates

    •  

    How to Apply - Wash In Machiene Wash

    1. Remove all detergent build-up from the detergent dispenser.
    2. Place maximum of 2 clean garments in washing machine.
    3. Use 2 full caps (100ml) per garment.
    4. Run 300 synthetic cycle and slow spin.

    Do not machine wash garments if taped seams have become dislodged.*

    How to Apply - Hand Wash (use gloves)

    1. Immerse 1 clean garment in 6L of hand-hot water in a bowl or sink.
    2. Add 1 full cap (50ml) of TX.Direct.
    3. Agitate to mix, leave to soak for 5-10 minutes, then agitate thoroughly.
    4. Rinse with cold water until water runs clear.

     

    Drying

    Drying: Air dry or tumble dry on a low setting if care label allows. To maintain waterproofing always wash with Nikwax® Tech Wash®. Do not use detergents. *Faulty taped seams sometimes become detached on old or worn garments. They can be re-stuck using a proprietary clear glue after waterproofing and drying.